Description
There are sectors where the makeup water may have TSS upto 100 on account of the source of the water. There may also be relatively poorer microbiological control. However it is assumed that the plant will be following some water treatment procedures including those for removal of oil and grease and heavy salts.
TP-19 is a cross fluted film fill that works on the principle of water droplets developing a fine film on the surface of the media. The surface tension of the polymer holds the film long enough for efficient heat transfer with the ambient air.
The flute height of 19-mm along with Technopick Polyplast efficient microstructure gives an effective surface area of 158 m2/m3 resulting in high thermal (KaV/L) performance.
Features and Advantages
- Virgin PVC resin is processed on in-house T-die/calendering units, which ensure proper fusion of PVC and other additives. The process thus imparts superior mechanical and physical properties to the fill sheet as well as also ensures uniform thickness on the sheet. Most fill manufacturers outsource the film from outside reprocessing units.
- Double folded edges that impart maximum strength at critical load bearing points. A double edge folded COOLFill TP-19 with a thickness of 0.25mm (0.5 mm at the edges) will have the equivalent application strength of a comparable flute fill at 0.38 mm thick.
- Minimum weight per unit volume assures easier handling and inexpensive support structures
- Both the top and bottom of the formed fill sheet have defined gluing points – an enhanced flat surface along the flutes. This results in reduced glue consumption per cubic meter of fill volume. For a fill which is mostly site assembled, this can give up to 30% saving in the glue consumption compared to similar products as well as a better visible honeycomb
- Choice between Black (UV stabilized) and Translucent White / White (UV+IR stabilized) fill media.
- Can be supplied in either module form from factory or assembled at location.
Technical Specifications
| Characteristics | TP-19 |
|---|---|
| Primary Cooling Towers Application | Counterflow |
| Flute height | 19 mm |
| MOC | Virgin rigid PVC |
| Longitudinal pitch | 50 mm |
| UV Stabilization | White – Titanium Dioxide Black – Carbon Black |
| Spiral angle | 28° |
| Std. Sheet size L x W |
1200mm x 600mm |
| Recommended Max Fill Sheet size L x W | 1800 mm x 600 mm |
| Surface area per unit volume | 158 m²/m³ |
| Standard Weight | 27 Kgs/m3 |
| Maximum continuous Operating temp. | 55 °C |
| Standard Fill Sheet Finished Thickness (Available in 0.23mm thickness Other thickness on request) |
0.25 mm |
| Standard Followed for Material properties | CTI STD-136 |
